surface luminaire DECKO FL,AT DALI2 Ø 40CM DALI controllable, CCT Switch, multipower IP54, white dimmable

LED surface-mounted luminaire DECKO FLAT DALI-2, IP54, Ø 40cm, 24W 3000/4000K (CCT Switch) 2850lm 120°, DALI dimmable (stepless)

The LED surface-mounted luminaire DECKO FLAT DALI-2 from MEGATRON is a round, flat luminaire with a diameter of 40 cm and a power of 24W. It offers an adjustable light color of warm white or neutral white and a luminous flux of 2850lm. The luminaire is suitable for indoor areas, wet rooms, and protected outdoor areas.

Application and technical details

This surface-mounted luminaire can be mounted on the ceiling as well as on the wall. With an operating voltage range of 178-260V and a nominal current of 260-600mA, the luminaire is versatile. It has IP54 protection against moisture and dust as well as IK03 protection against accidents and vandalism. The luminaire has a protection class 1 and weighs 0.878kg.

Functions and features

The DECKO FLAT luminaire is DALI-2 dimmable and can be integrated into modern building automation systems. It has a flat, homogeneous light output and is equipped with a high-quality, yellowing-resistant acrylic cover. The luminaire provides flicker-free light with instant full light output and can be retrofitted with a suitable emergency power module and high-frequency motion sensor.

Installation and energy efficiency

The DECKO FLAT luminaire can be easily connected to the mains voltage using cable quick clamps. With a conductor cross-section of 1.5 mm² and an energy efficiency of 118.75lm/W, the luminaire is suitable for both AC and DC. It has a low energy consumption of 24kWh/1,000h and a long average lamp life of 50,000 hours.

Light functions and customization options

The DECKO FLAT luminaire offers an adjustable light color of warm white or neutral white, as well as a color rendering index of 80-89Ra. With a beam angle of 120° and a diffuse light distribution, the luminaire provides pleasant illumination. It is dimmable and can be individually adjusted to the desired brightness.